Air compressors are extremely useful for many purposes and in a wide variety of industries. They're also prone to water damage, which can be costly and ruin the machine. The most common cause of water in your air compressor lines is condensation from inside the building. This condensation needs to be removed before it reaches the compressor so that it does not get into the system itself and ruin it. To keep water out of your air compressor lines, you need to use an appropriate dehumidifier or dryer venting outside, instead of using window AC units.
A dehumidifier is a great option for compressor protection, but they require the building to be sealed off from outside moisture and needs to run 24 hours a day. A dehumidifier will pull the moisture out of the air and discharge it through an outlet, where it can easily dry up. This system can also be used with a venting fan or blower to keep adequate ventilation throughout your workspace. While this system may seem like overkill, it's important to remember that you're protecting an expensive piece of equipment when you use one of these!
Dehumidifiers have several models available on the market there are portable types that sit on desks or carts and there are whole-building models that are installed in the ceiling. They may also have an auto-shutoff feature, which turns off the machine when the moisture reaches a specific level. This will save you money and energy by preventing over-drying of the air, which is common with this system! Whenever you decide to find out detailed information on air compressor, you have to navigate to https://aircompressorfit.com/ website.
A dryer venting system works similarly to a dehumidifier, though it does not remove moisture from inside your building. Instead, it simply vents out of the top of your building and away from your equipment. This type of system is much easier to install than a whole-house dehumidifier but doesn't work quite as well at keeping moisture out. However, if you're working in an older building or have trouble with low ceilings, this is a much more practical solution. Dryer venting systems are a good option if you can't install whole-house dehumidifiers or need to control the moisture outside of your building!
Besides these two options, do not use window air conditioners they vent inside and will lead to water damage! Also, consider using an air compressor cover if you're keeping your machine outside or in an unheated area. This will help protect it from rain and snow and potential condensation problems. It's also important to keep your lines clean by removing any debris that may build up.
The best way to keep water out of air compressor lines is by using a pump saver filter. A lot of people don’t know that these filters exist, but they can be found on Amazon for about 20 bucks and will save you from buying an expensive new pump if your old one breaks down because it was clogged with dirt or debris.